0-999 1000-1999 2000-2999 3000-3999 4000-4999 5000-5999 6000-6999
0 The operation completed successfully. ERROR_SUCCESS 1 Incorrect function. ERROR_INVALID_FUNCTION 2 The system cannot find the file specified. ERROR_FILE_NOT_FOUND 3 The system cannot find the path specified. ERROR_PATH_NOT_FOUND 4 The system cannot open the file. ERROR_TOO_MANY_OPEN_FILES 5 Access is denied. ERROR_ACCESS_DENIED 6 The handle is invalid. ERROR_INVALID_HANDLE 7 The storage control blocks were destroyed. ERROR_ARENA_TRASHED 8 Not enough storage is available to process this command. ERROR_NOT_ENOUGH_MEMORY 9 The storage control block address is invalid. ERROR_INVALID_BLOCK 10 The environment is incorrect. ERROR_BAD_ENVIRONMENT 11 An attempt was made to load a program with an incorrect format. ERROR_BAD_FORMAT 12 The access code is invalid. ERROR_INVALID_ACCESS 13 The data is invalid. ERROR_INVALID_DATA 14 Not enough storage is available to complete this operation. ERROR_OUTOFMEMORY 15 The system cannot find the drive specified. ERROR_INVALID_DRIVE 16 The directory cannot be removed. ERROR_CURRENT_DIRECTORY 17 The system cannot move the file to a different disk drive. ERROR_NOT_SAME_DEVICE 18 There are no more files. ERROR_NO_MORE_FILES 19 The media is write protected. ERROR_WRITE_PROTECT 20 The system cannot find the device specified. ERROR_BAD_UNIT 21 The device is not ready. ERROR_NOT_READY 22 The device does not recognize the command. ERROR_BAD_COMMAND 23 Data error (cyclic redundancy check). ERROR_CRC 24 The program issued a command but the command length is incorrect. ERROR_BAD_LENGTH 25 The drive cannot locate a specific area or track on the disk. ERROR_SEEK 26 The specified disk or diskette cannot be accessed. ERROR_NOT_DOS_DISK 27 The drive cannot find the sector requested. ERROR_SECTOR_NOT_FOUND 28 The printer is out of paper. ERROR_OUT_OF_PAPER 29 The system cannot write to the specified device. ERROR_WRITE_FAULT 30 The system cannot read from the specified device. ERROR_READ_FAULT 31 A device attached to the system is not functioning. ERROR_GEN_FAILURE 32 The process cannot access the file because it is being used by another process. ERROR_SHARING_VIOLATION 33 The process cannot access the file because another process has locked a portion of the file. ERROR_LOCK_VIOLATION 34 The wrong diskette is in the drive. Insert %2 (Volume Serial Number: %3) into drive %1. ERROR_WRONG_DISK 36 Too many files opened for sharing. ERROR_SHARING_BUFFER_EXCEEDED 38 Reached the end of the file. ERROR_HANDLE_EOF 39 The disk is full. ERROR_HANDLE_DISK_FULL 50 The network request is not supported. ERROR_NOT_SUPPORTED 51 The remote computer is not available. ERROR_REM_NOT_LIST 52 A duplicate name exists on the network. ERROR_DUP_NAME 53 The network path was not found. ERROR_BAD_NETPATH 54 The network is busy. ERROR_NETWORK_BUSY 55 The specified network resource or device is no longer available. ERROR_DEV_NOT_EXIST 56 The network BIOS command limit has been reached. ERROR_TOO_MANY_CMDS 57 A network adapter hardware error occurred. ERROR_ADAP_HDW_ERR 58 The specified server cannot perform the requested operation. ERROR_BAD_NET_RESP 59 An unexpected network error occurred. ERROR_UNEXP_NET_ERR 60 The remote adapter is not compatible. ERROR_BAD_REM_ADAP 61 The printer queue is full. ERROR_PRINTQ_FULL 62 Space to store the file waiting to be printed is not available on the server. ERROR_NO_SPOOL_SPACE 63 Your file waiting to be printed was deleted. ERROR_PRINT_CANCELLED 64 The specified network name is no longer available. ERROR_NETNAME_DELETED 65 Network access is denied. ERROR_NETWORK_ACCESS_DENIED 66 The network resource type is not correct. ERROR_BAD_DEV_TYPE 67 The network name cannot be found. ERROR_BAD_NET_NAME 68 The name limit for the local computer network adapter card was exceeded. ERROR_TOO_MANY_NAMES 69 The network BIOS session limit was exceeded. ERROR_TOO_MANY_SESS 70 The remote server has been paused or is in the process of being started. ERROR_SHARING_PAUSED 71 No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept. ERROR_REQ_NOT_ACCEP 72 The specified printer or disk device has been paused. ERROR_REDIR_PAUSED 80 The file exists. ERROR_FILE_EXISTS 82 The directory or file cannot be created. ERROR_CANNOT_MAKE 83 Fail on INT 24. ERROR_FAIL_I24 84 Storage to process this request is not available. ERROR_OUT_OF_STRUCTURES 85 The local device name is already in use. ERROR_ALREADY_ASSIGNED 86 The specified network password is not correct. ERROR_INVALID_PASSWORD 87 The parameter is incorrect. ERROR_INVALID_PARAMETER 88 A write fault occurred on the network. ERROR_NET_WRITE_FAULT 89 The system cannot start another process at this time. ERROR_NO_PROC_SLOTS 100 Cannot create another system semaphore. ERROR_TOO_MANY_SEMAPHORES 101 The exclusive semaphore is owned by another process. ERROR_EXCL_SEM_ALREADY_OWNED 102 The semaphore is set and cannot be closed. ERROR_SEM_IS_SET 103 The semaphore cannot be set again. ERROR_TOO_MANY_SEM_REQUESTS 104 Cannot request exclusive semaphores at interrupt time. ERROR_INVALID_AT_INTERRUPT_TIME 105 The previous ownership of this semaphore has ended. ERROR_SEM_OWNER_DIED 106 Insert the diskette for drive %1. ERROR_SEM_USER_LIMIT 107 The program stopped because an alternate diskette was not inserted. ERROR_DISK_CHANGE 108 The disk is in use or locked by another process. ERROR_DRIVE_LOCKED 109 The pipe has been ended. ERROR_BROKEN_PIPE 110 The system cannot open the device or file specified. ERROR_OPEN_FAILED 111 The file name is too long. ERROR_BUFFER_OVERFLOW 112 There is not enough space on the disk. ERROR_DISK_FULL 113 No more internal file identifiers available. ERROR_NO_MORE_SEARCH_HANDLES 114 The target internal file identifier is incorrect. ERROR_INVALID_TARGET_HANDLE 117 The IOCTL call made by the application program is not correct. ERROR_INVALID_CATEGORY 118 The verify-on-write switch parameter value is not correct. ERROR_INVALID_VERIFY_SWITCH 119 The system does not support the command requested. ERROR_BAD_DRIVER_LEVEL 120 This function is not supported on this system. ERROR_CALL_NOT_IMPLEMENTED 121 The semaphore timeout period has expired. ERROR_SEM_TIMEOUT 122 The data area passed to a system call is too small. ERROR_INSUFFICIENT_BUFFER 123 The filename, directory name, or volume label syntax is incorrect. ERROR_INVALID_NAME 124 The system call level is not correct. ERROR_INVALID_LEVEL 125 The disk has no volume label. ERROR_NO_VOLUME_LABEL 126 The specified module could not be found. ERROR_MOD_NOT_FOUND 127 The specified procedure could not be found. ERROR_PROC_NOT_FOUND 128 There are no child processes to wait for. ERROR_WAIT_NO_CHILDREN 129 The %1 application cannot be run in Win32 mode. ERROR_CHILD_NOT_COMPLETE 130 Attempt to use a file handle to an open disk partition for an operation other than raw disk I/O. ERROR_DIRECT_ACCESS_HANDLE 131 An attempt was made to move the file pointer before the beginning of the file. ERROR_NEGATIVE_SEEK 132 The file pointer cannot be set on the specified device or file. ERROR_SEEK_ON_DEVICE 133 A JOIN or SUBST command cannot be used for a drive that contains previously joined drives. ERROR_IS_JOIN_TARGET 134 An attempt was made to use a JOIN or SUBST command on a drive that has already been joined. ERROR_IS_JOINED 135 An attempt was made to use a JOIN or SUBST command on a drive that has already been substituted. ERROR_IS_SUBSTED 136 The system tried to delete the JOIN of a drive that is not joined. ERROR_NOT_JOINED 137 The system tried to delete the substitution of a drive that is not substituted. ERROR_NOT_SUBSTED 138 The system tried to join a drive to a directory on a joined drive. ERROR_JOIN_TO_JOIN 139 The system tried to substitute a drive to a directory on a substituted drive. ERROR_SUBST_TO_SUBST 140 The system tried to join a drive to a directory on a substituted drive. ERROR_JOIN_TO_SUBST 141 The system tried to SUBST a drive to a directory on a joined drive. ERROR_SUBST_TO_JOIN 142 The system cannot perform a JOIN or SUBST at this time. ERROR_BUSY_DRIVE 143 The system cannot join or substitute a drive to or for a directory on the same drive. ERROR_SAME_DRIVE 144 The directory is not a subdirectory of the root directory. ERROR_DIR_NOT_ROOT 145 The directory is not empty. ERROR_DIR_NOT_EMPTY 146 The path specified is being used in a substitute. ERROR_IS_SUBST_PATH 147 Not enough resources are available to process this command. ERROR_IS_JOIN_PATH 148 The path specified cannot be used at this time. ERROR_PATH_BUSY 149 An attempt was made to join or substitute a drive for which a directory on the drive is the target of a previous substitute. ERROR_IS_SUBST_TARGET 150 System trace information was not specified in your CONFIG.SYS file, or tracing is disallowed. ERROR_SYSTEM_TRACE 151 The number of specified semaphore events for DosMuxSemWait is not correct. ERROR_INVALID_EVENT_COUNT 152 DosMuxSemWait did not execute; too many semaphores are already set. ERROR_TOO_MANY_MUXWAITERS 153 The DosMuxSemWait list is not correct. ERROR_INVALID_LIST_FORMAT 154 The volume label you entered exceeds the label character limit of the target file system. ERROR_LABEL_TOO_LONG 155 Cannot create another thread. ERROR_TOO_MANY_TCBS 156 The recipient process has refused the signal. ERROR_SIGNAL_REFUSED 157 The segment is already discarded and cannot be locked. ERROR_DISCARDED 158 The segment is already unlocked. ERROR_NOT_LOCKED 159 The address for the thread ID is not correct. ERROR_BAD_THREADID_ADDR 160 The argument string passed to DosExecPgm is not correct. ERROR_BAD_ARGUMENTS 161 The specified path is invalid. ERROR_BAD_PATHNAME 162 A signal is already pending. ERROR_SIGNAL_PENDING 164 No more threads can be created in the system. ERROR_MAX_THRDS_REACHED 167 Unable to lock a region of a file. ERROR_LOCK_FAILED 170 The requested resource is in use. ERROR_BUSY 173 A lock request was not outstanding for the supplied cancel region. ERROR_CANCEL_VIOLATION 174 The file system does not support atomic changes to the lock type. ERROR_ATOMIC_LOCKS_NOT_SUPPORTED 180 The system detected a segment number that was not correct. ERROR_INVALID_SEGMENT_NUMBER 182 The operating system cannot run %1. ERROR_INVALID_ORDINAL 183 Cannot create a file when that file already exists. ERROR_ALREADY_EXISTS 186 The flag passed is not correct. ERROR_INVALID_FLAG_NUMBER 187 The specified system semaphore name was not found. ERROR_SEM_NOT_FOUND 188 The operating system cannot run %1. ERROR_INVALID_STARTING_CODESEG 189 The operating system cannot run %1. ERROR_INVALID_STACKSEG 190 The operating system cannot run %1. ERROR_INVALID_MODULETYPE 191 Cannot run %1 in Win32 mode. ERROR_INVALID_EXE_SIGNATURE 192 The operating system cannot run %1. ERROR_EXE_MARKED_INVALID 193 is not a valid Win32 application. ERROR_BAD_EXE_FORMAT 194 The operating system cannot run %1. ERROR_ITERATED_DATA_EXCEEDS_64k 195 The operating system cannot run %1. ERROR_INVALID_MINALLOCSIZE 196 The operating system cannot run this application program. ERROR_DYNLINK_FROM_INVALID_RING 197 The operating system is not presently configured to run this application. ERROR_IOPL_NOT_ENABLED 198 The operating system cannot run %1. ERROR_INVALID_SEGDPL 199 The operating system cannot run this application program. ERROR_AUTODATASEG_EXCEEDS_64k 200 The code segment cannot be greater than or equal to 64K. ERROR_RING2SEG_MUST_BE_MOVABLE 201 The operating system cannot run %1. ERROR_RELOC_CHAIN_XEEDS_SEGLIM 202 The operating system cannot run %1. ERROR_INFLOOP_IN_RELOC_CHAIN 203 The system could not find the environment option that was entered. ERROR_ENVVAR_NOT_FOUND 205 No process in the command subtree has a signal handler. ERROR_NO_SIGNAL_SENT 206 The filename or extension is too long. ERROR_FILENAME_EXCED_RANGE 207 The ring 2 stack is in use. ERROR_RING2_STACK_IN_USE 208 The global filename characters, * or ?, are entered incorrectly or too many global filename characters are specified. ERROR_META_EXPANSION_TOO_LONG 209 The signal being posted is not correct. ERROR_INVALID_SIGNAL_NUMBER 210 The signal handler cannot be set. ERROR_THREAD_1_INACTIVE 212 The segment is locked and cannot be reallocated. ERROR_LOCKED 214 Too many dynamic-link modules are attached to this program or dynamic-link module. ERROR_TOO_MANY_MODULES 215 Can't nest calls to LoadModule. ERROR_NESTING_NOT_ALLOWED 216 The image file %1 is valid, but is for a machine type other than the current machine. ERROR_EXE_MACHINE_TYPE_MISMATCH 230 The pipe state is invalid. ERROR_BAD_PIPE 231 All pipe instances are busy. ERROR_PIPE_BUSY 232 The pipe is being closed. ERROR_NO_DATA 233 No process is on the other end of the pipe. ERROR_PIPE_NOT_CONNECTED 234 More data is available. ERROR_MORE_DATA 240 The session was canceled. ERROR_VC_DISCONNECTED 254 The specified extended attribute name was invalid. ERROR_INVALID_EA_NAME 255 The extended attributes are inconsistent. ERROR_EA_LIST_INCONSISTENT 259 No more data is available. ERROR_NO_MORE_ITEMS 266 The copy functions cannot be used. ERROR_CANNOT_COPY 267 The directory name is invalid. ERROR_DIRECTORY 275 The extended attributes did not fit in the buffer. ERROR_EAS_DIDNT_FIT 276 The extended attribute file on the mounted file system is corrupt. ERROR_EA_FILE_CORRUPT 277 The extended attribute table file is full. ERROR_EA_TABLE_FULL 278 The specified extended attribute handle is invalid. ERROR_INVALID_EA_HANDLE 282 The mounted file system does not support extended attributes. ERROR_EAS_NOT_SUPPORTED 288 Attempt to release mutex not owned by caller. ERROR_NOT_OWNER 298 Too many posts were made to a semaphore. ERROR_TOO_MANY_POSTS 299 Only part of a ReadProcessMemoty or WriteProcessMemory request was completed. ERROR_PARTIAL_COPY 300 The oplock request is denied. ERROR_OPLOCK_NOT_GRANTED 301 An invalid oplock acknowledgment was received by the system. ERROR_INVALID_OPLOCK_PROTOCOL 317 The system cannot find message text for message number 0x%1 in the message file for %2. ERROR_MR_MID_NOT_FOUND 487 Attempt to access invalid address. ERROR_INVALID_ADDRESS 534 Arithmetic result exceeded 32 bits. ERROR_ARITHMETIC_OVERFLOW 535 There is a process on other end of the pipe. ERROR_PIPE_CONNECTED 536 Waiting for a process to open the other end of the pipe. ERROR_PIPE_LISTENING 994 Access to the extended attribute was denied. ERROR_EA_ACCESS_DENIED 995 The I/O operation has been aborted because of either a thread exit or an application request. ERROR_OPERATION_ABORTED 996 Overlapped I/O event is not in a signaled state. ERROR_IO_INCOMPLETE 997 Overlapped I/O operation is in progress. ERROR_IO_PENDING 998 Invalid access to memory location. ERROR_NOACCESS 999 Error performing inpage operation. ERROR_SWAPERROR